Investigation of the combustion processes of gas-generating flame extinguisher cartridges with car-bon combustible

№1-2023 https://doi.org/10.53939/15605655/2023_1_23 Aіtеnov E., Abdrakova F.Y., Beхsultan Zh.B., Myshyrova Zh.К., Tulepov M.I. Annotation: The aim of the work is to search optimal compositions of gas-generating flame extinguisher cartridges, which should catch fire in very short periods of time, measured within 10-15 milliseconds, in this regard, studies of the flash point with a minute delay in…

Phytochemical analysis of raw materials Calligonum leucocladum Bunge

№1-2023 https://doi.org/10.53939/15605655/2023_1_16 Yeszhanova G.T., Bekseytova K.S., Rahimzhanova D.T Annotation: This article presents the results of a study on the morphological structure, which are indicators of the quality of raw materials of C. leucocladum B., the proportion of moisture in the raw materials is 5.91 ± 0.03%, the mass fraction of ash is 7.23 ± 0.01%. An…

Application of coal tar pitch as an alternative to polyacrylonitrile in electroforming of composite fibres

PDF https://doi.org/10.53939/15605655/2022_3_33 Kaidar B.B., Smagulova G.T., Imash А.A., Mansurov Z.A. Abstract. The paper presents the results of studies on the synthesis of carbon fibers from polyacrylonitrile and coal furnace. Coal tar pitch was produced by the thermal treatment of coal tar. Carbon fibres from a mixture of PAN/coal pitch were obtained by electrospinning. Properties of…

Study of diffusion areas of investigation of combustion of a briquette with air channels

PDF https://doi.org/10.53939/15605655/2022_1_28 Artykbayeva A.B., Zhapekova A.O., Rakhimova B.U.,. Tulupov M.I, Kudiyarova Zh.B., Amir Zh. Abstract: The main reasons for production of coal briquettes with air channels are based on changing the diffusion flows of the oxidizer and increasing the number of volatile. The yield of volatile substances, in turn, depends on the amount of water, which,…

Creation of a waste-free, high-energy technology for obtaining target materials due to the heat of exothermic reactions of reacting substances by the SHS method

PDF https://doi.org/10.53939/15605655/2022_1_20 Aknazarov S.Kh.,.Mutushev A.Zh, JuanMariaGonzalez-Leal, Bayrakova O.S., Ponomareva E.A., Allan I.K., Kydyrali S.E. Abstract: To determine the burning rate of the charge for the production of aluminum diboride, a steel pipe with a welded bottom in the form of a glass was used. Holes were drilled vertically on the side surface at a distance of…

Features of electrochemical behavior of porous carbon electrodes of metal-air elements in aqueous solutions of alkalis

PDF https://doi.org/10.53939/15605655/2022_1_15 Madyev M.G., Kunasheva Z.H., Sharipova D.G., Sagidullina A.N. Abstract: Studies have been conducted to improve the energy efficiency of porous carbon electrodes for metalair (in particular aluminum-air) chemical current sources (CCS) in order to increase their industrial profitability. Experimental analysis and preparation of CCS prototypes were made. The dependences of iron and copper…

Process for the production of cellulosic materials with fire retardant properties using sodium silicate and nitrogen-phosphorus containing compounds

МРНТИ 64.29.09, 61.67.81                                                             №3 (2020г.)   Tausarova B.R., Abilkassova S.O., Zhaylhanova А.A.     This article presents the research on the use of new sodium silicate-, guanidine-, and sodium hydrogen phosphate-based compounds to impart the fire-retardant properties to cellulosic textile materials. We studied the influence of the concentration of the initial components, temperature, and heat treatment…

Change in the stability of clay hydrodispersions under the influence of polyelectrolytes that differ in the properties of macromolecules functional groups

МРНТИ 31.15.37                                                                             №3 (2020г.) Asanov А., Mameshova S.A.   This article sets forth the study on the change in the stability of clay hydrodispersions under the influence of polyelectrolytes that differ in molar ratio and the nature of the functional groups is studied. It was revealed that under the influence of a polyelectrolyte containing non-ionizable…

Development of cellulose materials with antimicrobial properties based on copper nanoparticles

МРНТИ 61.67.81, 47.09.48                                                                  №3 (2020г.) Tausarova B. R.,  Shaikhova Zh., Egeubaeva S.S., Kalimoldina L.M.     Methods for the synthesis of copper nanoparticles by reducing copper sulfate in an aqueous medium in the presence of sucrose are considered. The determination of optimal synthesis conditions, the antibacterial activity of copper nanoparticles was studied, the influence of various…

Synthesis of copper nanoparticles and their application for modification of cellulose textile materials metallurgy

МРНТИ 61.67.81                                                                               №2 (2020г.)   Tausarova B.R., Suleimenova M.Sh., Alipbaev   A.N.   The article considers an environmentally friendly method for producing copper nanoparticles in aqueous solutions via reduction by glucose in the presence of polyvinyl alcohol; optimal synthesis conditions have been selected. The resulting copper nanoparticles are stable, spherical in shape, with diameter ranging from…